Maretron Alarm Module ALM100 Manual de usuario descargar pdf (Pagina 53)

7 Upgrading N2KView

As N2KView is released with new features on a regular basis, you will want to

keep N2KView upgraded to the latest version.

7.1 Automatic Updates

If your PC running N2KView, TSM1330, TSM1330C, TSM800, TSM800C,

DSM800, MBB200C, or MBB100 has access to the Internet through the ship’s

computer network, N2KView will check on each startup if a later version is

available. If you are ready for an update, then you will asked if you want to

update.

Follow the instructions given. On the TSM800, TSM1330, DSM800 and MBB100,

the system will restart about 6 minutes after the update is started. On the

TSM800C, TSM1330C and MBB200C, you will be prompted at the end of the

installation and the system will restart immediately.

Automatic updates may be disabled from the Configuration Dialog. (see

9.4.4.1.5).

7.2 Manual Updates

If you do not have access to the Internet, your copy of N2KView will need to be

upgraded manually. You will need to load the upgrade files from the Maretron

website onto a USB Flash Drive (on a computer that does have Internet access)

and then insert the USB Flash Drive into the computer, TSM800, TSM800C,

TSM1330, TSM1330C, MBB100 MBB200C, or DSM800.

Contact Maretron Support to verify that the version numbers of the following files

are the latest versions.

If you are running on a computer (PC or Mac), transfer the following files onto the

ROOT of the USB memory stick

<http://www.maretron.com/files/N2KView/Maretron N2KView

4.0.0.20140108.air>

<http://www.maretron.com/files/N2KView/n2kview-update-descriptor-

2.5.xml>

If you are running on a TSM800, TSM800C, TSM1330, TSM1330C, MBB100,

MBB200C, or DSM800, transfer the following files onto the ROOT of the USB

Flash Drive

Revision 4.0.2 Page 53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 379 380

Sin comentarios

Maretron Alarm Module ALM100 Manual de usuario Pagina 53