Maretron Alarm Module ALM100 Manual de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
9.4.8.2.7 Temperature
Degrees Centigrade, Degrees Fahrenheit
9.4.8.2.8 Time Format
12 Hour, 24 Hour
9.4.8.2.9 Volume
Imperial Gallons (gal(imp)), Liters (litre), US Gallons (gal(US))
9.4.8.2.10 Wind Speed
Beaufort (Bft), Kilometers/Hour (km/h), Nautical Miles/Hour (knots), Miles/Hour
(mph)
9.4.8.3 Global Settings
This section of the “Units Setup” dialog allows you to configure values that are
used throughout the N2KView software.
9.4.8.3.1 Local Time Offset
These selection boxes allow you to configure the offset from UTC (Universal
Coordinated Time, also known as GMT, or Greenwich Mean Time). For
example, if you were in the Eastern US, you would select -4:00 during daylight
savings time, and -5:00 during standard time (daylight savings not in effect). You
can configure local time in increments as small as 15 minutes.
Local Time Offset may be set to NMEA2000, in which case N2KView will look for
the offset on the NMEA2000 bus (this value can be supplied in PGN 129033). If
this value is not received on the bus then, as a last resort, N2KView will use the
time offset defined in the computer. The value of the Local Time Offset can be
displayed in a digital component using the Local Time Offset parameter under
the Time/Date category.
Revision 4.0.2 Page 93
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 379 380

Comentarios a estos manuales

Sin comentarios