Maretron Alarm Module ALM100 Manual de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
sequence is repeated until a connection is made. Having the Use xxx
Connection box unchecked will cause this option to be skipped. Once a
connection is made, it is held and the other options are not tried.
For example, on a laptop, you may configure the 1
st
Connection with the Serial
Number of the IPG100, and configure the 2
nd
Connection to use the Maretron
Cloud Server. That way N2KView will attempt the local connection first; if you are
off the boat the local connection will fail and you will fall back to the Cloud Server.
Or, if you have a primary IPG100 and backup USB100 with a PC server on your
network, enter the Serial Number of the IPG100 as the 1
st
Connection and the
USB100 as the 2
nd
Connection; if the primary fails, you will automatically fall back
to the backup.
9.4.5.1.1 Available Connections
If N2KView detects any IPG100s on the local network (LAN) or that a USB100 is
connected, it will populate this list with a list of the IPG100s and USB100s found.
It gives the serial number and IP Address of the IPG100 and the number of the
Dongle plugged into the USB100.The connection may be entered into one of the
three main Connections by selecting the line in the list and pressing one of the
buttons directly below the list.
9.4.5.1.2 Use 1
st
Connection
Having this box checked enables the rest of the boxes for the 1
st
Connection, and
is an overall enable for the 1
st
Connection.
9.4.5.1.3 Use 2
nd
Connection
Having this box checked enables the rest of the boxes for the 2
nd
Connection,
and is an overall enable for the 2
nd
Connection.
9.4.5.1.4 Use 3rd Connection
Having this box checked enables the rest of the boxes for the 3
rd
Connection,
and is an overall enable for the 3
rd
Connection.
9.4.5.1.5 Connection Type
This is a drop down list from which you may select one of the following
connection types for the connection to the NMEA 2000 network.
Revision 4.0.2 Page 79
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 379 380

Comentarios a estos manuales

Sin comentarios