Maretron Alarm Module ALM100 Manual de usuario descargar pdf (Pagina 73)

100

101

9.4.4.2 Network Configuration Section

The fields in this section are used to control the configuration of the network

connection in the MBB100, MBB200C, TSM800, TSM800C, TSM1330,

TSM1330C and DSM800 only.

9.4.4.2.1 Use DHCP

DHCP (Dynamic Host Configuration Protocol) is a method by which the MBB100

or DSM800 can get its IP address (see section 8.2) assigned on startup. The IP

address is typically assigned by a router on the network.

If there is no router, or the network administrator chooses to allocate all the

addresses, then this box should be unchecked, and the IP address chosen for

this MBB100, TSM800, TSM1330 or DSM800 entered in the IP Address field.

9.4.4.2.2 Hostname

This is the name by which this MBB100, MBB200C, TSM800, TSM800C,

TSM1330, TSM1330C or DSM800 will be known on the network.

Revision 4.0.2 Page 73

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 379 380

Comentarios a estos manuales

Sin comentarios

Maretron Alarm Module ALM100 Manual de usuario Pagina 73

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Maretron Alarm Module ALM100